Skip to main content

Vieser Construction

Vieser Construction · Material price online

See your price at your exact size →

Material price in seconds, no sales visit. Installation is quoted separately. Prefer a visit? Request a free estimate or call (754) 707-3281.

See prices by size →

Vieser Construction installs impact windows and doors across Broward, Miami-Dade and Palm Beach at a published installation rate from $200 per window. We coordinate your complete installation from measurement to final inspection. You get a written price per opening before any work starts.

Free written estimate: call or text 754-707-3281.

Before and after: a two-story South Florida home with new dark-frame impact windows installed by Vieser Construction.

Published installation rates

Many installers publish only a wide price range per window, with product and labor mixed together. Ours is a fixed rate per opening, and it is right here.

OpeningInstallation
Window, largest side up to 74″$200 per window
Window, largest side over 74″ up to 96″$230 per window
Window, largest side over 96″$250 per window
Any door (sliding glass, French, entry, swing)$300 per panel
Mullion (joint between two units)$50 each

Installation only, ground floor and second floor, plus 7% sales tax. Openings above the second floor are quoted after a site visit.

Example: a 3-bedroom Broward home

OpeningInstallation
10 x windows, largest side up to 74″$2,000
2 x windows, largest side over 74″$460
3 x panels of a sliding glass door$900
1 x front door$300
Installation total$3,660

The windows and doors themselves are added line by line on top of this, by brand, series and size. Permit fees are the city’s and are listed separately.

What the installation includes, step by step

  1. Measuring every rough opening. Not the old window. Older homes often have openings that are out of square or a different size than the window in them.
  2. Matching each opening to an approval. Every unit gets a Florida Product Approval or Miami-Dade NOA that covers its exact size and design pressure. In Broward and Miami-Dade, that approval must be valid for the High Velocity Hurricane Zone.
  3. Permit. Permit assistance is available. Our team coordinates the complete permitting process, including required documentation, engineering and permit submission, when applicable.
  4. Removal and installation. Old units out, openings corrected where needed, new units anchored and sealed exactly as the approval’s installation instructions require.
  5. Inspections and close-out. The job runs through the city’s final inspection. You keep the documents for your insurer.

Why the age of your house changes the job

Most homes in our area were built before the statewide Florida Building Code took effect in 2002. Those openings were never sized for today’s design pressures, and the older the house, the more often an opening needs work before a new unit can be anchored to its approval. Here is how old the housing is in the cities we serve most:

CityHomes built before 2000Homes built before 1970
Fort Lauderdale77%45%
Hollywood90%53%
Oakland Park90%46%
Wilton Manors87%48%
Lauderdale-by-the-Sea90%46%
Pompano Beach87%37%
Coral Springs87%4%
Coconut Creek78%5%

Source: U.S. Census Bureau ACS 2019-2023 5-year, table B25034.

Installation only: windows you already bought

If you already bought impact windows, we can install them. First we check that each unit’s approval covers its opening’s size and design pressure, and that the sizes fit the rough openings. A unit that does not match cannot pass inspection, and we tell you that before work starts, not after.

Insurance and wind mitigation

Florida law requires home insurers to offer discounts for wind-loss mitigation, and approved impact windows and doors on every opening are one of the features that count (section 627.0629, Florida Statutes). A wind mitigation inspection (form OIR-B1-1802) can document opening protection for your insurer; any change to your premium is the insurer’s decision. Keep the product approvals and the closed permit from the job for that inspection.

New construction: impact windows and doors going into block-wall openings on a two-story home, filmed on the job by Vieser Construction.

Brands we install

We install PGT, ES Windows and Mr. Glass impact windows and doors, and we quote them side by side when you ask. See PGT vs ESW vs Mr. Glass for how they compare.

Cities we cover

Fort Lauderdale · Wilton Manors · Oakland Park · Lauderdale-by-the-Sea · Pompano Beach · Coconut Creek · Coral Springs windows · Coral Springs doors · Hollywood

Frequently asked questions

How much does impact window installation cost?

Installation is priced per opening by its largest side: $200 per window up to 74 inches, $230 up to 96 inches and $250 above that. Every door is $300 per panel. A 3-bedroom home with 12 windows, a 3-panel slider and a front door comes to $3,660 in installation, plus the products and 7% sales tax.

Do you install impact windows I bought somewhere else?

Yes, after we confirm each unit’s approval covers its opening’s size and design pressure and that the sizes fit. If they don’t, we tell you before any work starts.

Do you help with the permit?

Yes. Permit coordination is available for qualifying projects. Our team manages the required documentation, engineering coordination and submission process from start to finish.

Why does the house age matter?

Homes built before the 2002 Florida Building Code have openings that were never sized for today’s design pressures, and older openings more often need correction before a new unit can be anchored to its approval.

📞 Call Now
Free EstimateCall or Text
See your home with impact windows