Impact doors in Coral Springs, FL must meet High Velocity Hurricane Zone rules, because all of Broward County is in the HVHZ. A typical home (Risk Category II) is designed for 170 mph gusts. Door replacement is permitted through the City of Coral Springs Building Department, using its eTRAKiT portal and the Form 015.1 retrofit packet.
Last checked: November 5, 2026 · General guidance. Confirm requirements for your address with the building department that serves Coral Springs.
The doors you find in Coral Springs homes
Most Coral Springs houses went up between the 1970s and the 1990s. The Census Bureau puts the median year built at 1988, and roughly four out of five homes predate the year 2000. A door from that era was built long before today's HVHZ testing rules, so an original slider or entry door is often the weakest opening on the house.
Three door types come up again and again in this city. The first is the sliding glass door across the back of the house, often opening onto a screened patio or a pool deck. The second is a pair of French doors, used where a family room or primary bedroom meets the yard. The third is the front entry door, sometimes flanked by narrow glass sidelites.
Each type is tested, approved and priced in its own way. This page walks through those differences for Coral Springs homeowners, along with the city paperwork that applies to door work.
Quick facts for Coral Springs door projects
Address-specific questions belong with the Building Department. These are the basics we verified for door work in the city.
| Topic | Coral Springs answer |
|---|---|
| Who issues the permit | City of Coral Springs Building Department, 9500 West Sample Road (City Hall) |
| Contact | 954-344-1025; buildingpermits@coralsprings.gov; Mon-Thu 7:30 a.m.-5 p.m., Fri 7:30 a.m.-2:30 p.m. |
| Portal | eTRAKiT at etrakit.coralsprings.gov |
| Is a permit needed? | Yes for non-like-for-like door replacement; not for glass-only swaps in approved, undamaged frames |
| Packet | Form 015.1, Retrofit of Windows & Doors, with one Broward schedule for every opening |
| Hurricane zone | HVHZ, citywide (all of Broward County) |
| Design wind speed | 170 mph, Risk Category II, FBC 2023 Sec. 1620.2 |
| Door tests in the HVHZ | TAS 202 (air, water, structural, forced entry) plus TAS 201 and TAS 203 for impact and cyclic loading |
| Label on the door | Florida product approval number or Miami-Dade product approval number |
Sliding glass door panels and configurations
Sliders are described by their panels, read from the outside looking in. An X is a panel that moves and an O is a fixed panel. So an XO door has the operating panel on the left, and an OX door has it on the right. Wider openings use three or four panels, such as XXX, OXO or OXXO, and some systems stack or pocket the panels into the wall.
The configuration matters for more than looks. It sets how many panels the door has, which drives the price, and it sets which product approval and installation drawing apply. A three-panel door in a wide family room opening is a different product than a two-panel door off a bedroom, even from the same series.
When you replace a slider, you can usually keep the same rough opening. Changing the size or moving the opening is an alteration, and the city packet asks for a sealed engineer or architect detail in that case.
- Two panels (XO or OX): the most common back door in older single-family homes
- Three panels (XXX or OXO): wider family room and pool deck openings
- Four panels (OXXO or XXXX): large openings where the center panels meet
- Note which side you want to open from before ordering; it is fixed at the factory
How HVHZ testing applies to a door
Inside the HVHZ, the Florida Building Code says sliding doors must comply with TAS 202, and other exterior door assemblies are held to the same standard. TAS 202 is a static pressure protocol that checks air leakage, water penetration, structural strength and forced entry. Impact-rated doors are also put through TAS 201, the missile test, and TAS 203, the cyclic pressure test that follows it.
Section 1626.2 of the code adds a detail that matters on install day. The test specimen is the whole assembled unit, including the frame and anchors, and the fasteners must match the size and spacing used in the field. In other words, a door is approved as a system. Swapping in a different anchor pattern than the drawing shows is not a small change.
You can see this on any HVHZ product approval for a door. The evaluation lists the air, water, structural and forced-entry tests, then the large missile and cyclic tests. It gives a maximum design pressure, and it points to installation drawings for sizes, spans and anchor types.
The label on the door itself has to show either the Florida product approval number or the Miami-Dade product approval number. That label is what the inspector looks for.
Inswing or outswing: the water question for French and entry doors
Swinging doors raise a question sliders do not: which way does the door open? It sounds like a style choice, but in the HVHZ it is often a water choice.
Two current Florida product approvals for impact entry doors that we checked say the outswing versions meet HVHZ water infiltration requirements and the inswing versions do not. Those approvals limit inswing doors to non-habitable areas, or to spots protected by an overhang or canopy deep enough that the angle from its edge to the sill is under 45 degrees. One approval only accepts the outswing door with a specific coastal sill.
So for a door that opens into living space, outswing is the setup those approvals accept without extra conditions. If your current French doors open into the family room, plan on a change in swing, or confirm that the product you pick is approved for an inswing setup at your exact location. A deep covered entry may qualify; an exposed patio usually needs a closer look.
The code also has a narrow exception for door assemblies in nonhabitable areas built to accept water. That is not the case for a door into a living room, bedroom or kitchen.
What Coral Springs asks for on a door permit
Coral Springs does not use a separate door form. Doors and windows share Form 015.1 and a single Broward County Uniform Retrofit Window & Door Schedule. Each door gets an opening ID on the floor plan, and the schedule records its product approval number, its rated pressure, the pressure the opening requires, its size and its wall zone.
A door near a corner of the house falls in the higher-pressure end zone, so a big slider on a back corner needs a product rated high enough for that spot. The design pressure for each opening can come from a sealed site-specific plan, a sealed worst-case chart or the Broward voluntary wind load chart for homes under 30 feet, under BORA Formal Interpretation #24.
Signed and sealed files go in digitally through eTRAKiT. Inspections are booked online too; the department stopped taking inspection requests by phone in February 2025. Permit fees come from the city's published fee schedule.
If the door contract is more than the threshold in Florida's lien law, a recorded Notice of Commencement must be on file and posted before the first inspection.
Pool patios, HOA rules and storm history
The back slider is the opening that faces the yard, the patio furniture and the trees. When Hurricane Wilma's eye crossed Coral Springs in October 2005, the city later estimated it lost about a third of its tree canopy across the 2004 and 2005 seasons. Loose branches and yard items are the kind of debris a large missile test is meant to stand in for.
Many homes sit inside associations such as Eagle Trace, Turtle Run, Wyndham Lakes or Ramblewood, and the city itself is known for strict appearance rules on paint and roofing. We did not find published door rules for these communities, so ask your board for its written specification on frame color, glass tint and grids before you order. A front door with sidelites is the most visible opening on the street, and it is the one boards notice first.
Townhouse and condo owners should go to the association before anything else, since doors on those buildings are often common elements or follow a building-wide standard.
How impact door pricing is put together
Door projects have two separate price parts. Installation is priced per panel, so a two-panel slider and a four-panel slider are not the same line item, and a pair of French doors counts as two panels. The installation price table on this page lists those per-panel rates.
The door itself is quoted separately by brand, series and size. Vieser Construction is an authorized installer for ESW, Mr. Glass and PGT, and each line has its own series, glass options and pressure ratings. Permit fees are the city's and are not part of either number.
Materials typically arrive 2–3 weeks after contract for in-stock projects. Dates are not promised, because review time at the city varies. After the work, a wind mitigation inspection (form OIR-B1-1802) can document the opening protection for your insurance company.
Working with Vieser Construction on doors in Coral Springs
We coordinate your complete installation from measurement to final inspection.
Permit assistance is available. Our team coordinates the complete permitting process, including required documentation, engineering and permit submission, when applicable.
To get a useful first answer, send us the door types you want to replace, the panel count and opening side of each slider, whether your French or entry doors swing in or out today, whether the opening has a covered overhang, and the name of your HOA if you have one.
Coral Springs neighborhoods we serve
Eagle TraceFairways at Eagle TraceTurtle RunWyndham LakesPelican TrailRamblewood SouthRamblewood EastMaplewoodCoral Springs Country Club
ZIP codes: 33065, 33067, 33071, 33073, 33075, 33076, 33077
Installation price per opening in Coral Springs
Installation is priced per opening, by the opening’s largest side. Doors are priced per panel. These are installation-only rates, plus 7% sales tax. The windows and doors themselves are quoted separately, line by line, by brand, series and size. Permit fees are set by the city and listed separately.
| Opening | Installation | Unit |
|---|---|---|
| Window, largest side up to 74″ | $200 | per window |
| Window, largest side over 74″ up to 96″ | $230 | per window |
| Window, largest side over 96″ | $250 | per window |
| Any door (sliding glass, French, entry, swing) | $300 | per panel |
| Mullion (joint between two units) | $50 | each |
Openings above the second floor are quoted after a site visit.
Impact doors in Coral Springs: questions we hear
Do I need a permit to replace a sliding glass door in Coral Springs?
In most cases, yes. The city's permitting guide lists non-like-for-like window and door replacement as permitted work. Only replacing glass inside existing approved frames, with no frame damage, is listed as not needing a permit. Door work uses the same Form 015.1 retrofit packet as windows. Call 954-344-1025 to confirm for your address.
How much does impact door installation cost in Coral Springs?
See the installation price table on this page. Impact doors are priced per panel, so a two-panel slider and a four-panel slider are priced differently, and French door pairs count each door. The door itself is quoted separately by brand, series and size. Permit fees are set by the City of Coral Springs.
Can impact French doors swing inward in Coral Springs?
Sometimes, but check the product approval. Florida approvals for impact doors that we reviewed say inswing versions do not meet HVHZ water infiltration rules and limit them to non-habitable areas or openings under a deep enough overhang. Outswing versions are the usual answer for doors into living space.
What tests does an impact door need in the HVHZ?
In Broward's HVHZ, doors are tested under TAS 202 for air leakage, water, structural pressure and forced entry. Impact-rated doors also pass TAS 201, the large missile test, and TAS 203, cyclic pressure loading. The door's label must show its Florida or Miami-Dade product approval number.
What does XO or OXXO mean on a sliding glass door?
It describes the panels as seen from outside. X is a panel that slides and O is a fixed panel. XO has the moving panel on the left; OX has it on the right. OXXO is a four-panel door with two center panels that open. The panel count also drives installation pricing.
Can Vieser help with the permit for my door replacement?
Yes. Permit coordination is available for qualifying projects. Our team manages the required documentation, engineering coordination and submission process from start to finish. Send the panel count and swing direction of each door so the right product approvals are matched to each opening.
Related
- See current factory pricing by window size (ESW, Mr. Glass)
- Impact windows and doors: material price guide
- Impact windows in Coral Springs: local rules and installation
- Impact doors
Planning impact doors in Coral Springs? We coordinate your complete installation from measurement to final inspection.
Call (754) 707-3281 or request an estimate.
Sources: City of Coral Springs Building Department · City of Coral Springs eTRAKiT portal · City of Coral Springs Form 015.1 Retrofit of Windows & Doors Submittal Packet · City of Coral Springs Hurricane and Tropical Storm Recovery Permitting Guide · Broward BORA Formal Interpretation #24 (8th Edition) · 2023 Florida Building Code excerpts and TAS 201/202/203 (National Glass Association handout) · 2023 Florida Building Code, Building, Section 1709.5 (UpCodes) · Florida product approval FL44212 evaluation (impact sliding glass door) · Florida product approval FL21855 evaluation (impact outswing door with sidelites) · Florida product approval FL15631.5 evaluation (impact entry door, inswing/outswing) · Florida product approval FL23957.5 evaluation (impact entry door) · Florida Statutes s. 713.135 (Notice of Commencement) · U.S. Census Bureau ACS 2024 1-year (via Census Reporter) · Wikipedia: Coral Springs, Florida · BEX Realty: Turtle Run, Coral Springs
Other Broward County cities we serve
Replacing windows too? See impact windows in Coral Springs.