Skip to main content

Vieser Construction

Vieser Construction · Material price online

See your price at your exact size →

Material price in seconds, no sales visit. Installation is quoted separately. Prefer a visit? Request a free estimate or call (754) 707-3281.

See prices by size →

Impact windows in Coconut Creek, FL are permitted by the city's own Building Division at the Government Center on West Copans Road, with contractor applications filed through ePermits. All of Broward County is in the High Velocity Hurricane Zone, so a typical home (Risk Category II) is designed for 170 mph gusts under FBC 2023 Section 1620.2.

Last checked: November 5, 2026 · General guidance. Confirm requirements for your address with the building department that serves Coconut Creek.

Half of Coconut Creek lives in multi-unit buildings

Coconut Creek does not look like most Broward suburbs on paper. The Census Bureau's 2020–2024 estimate counts 27,340 housing units, and about 50 percent of them sit in buildings with five or more units. Only about 29 percent are detached single-family houses. Roughly 28 percent are in buildings of 20 units or more.

For many residents, the first window question is not which brand but who decides. In a condo building, the association often controls the exterior, the window specification and the timing. In a detached house, you decide, within the city code and any HOA rules.

The city was incorporated on February 20, 1967, after splitting from Pompano Beach, and it grew as a planned community. Today it calls itself the Butterfly Capital of the World and has about 58,000 residents. This page covers the parts of a window project that are specific to it: the condo stock, the permit office, the wind rules and the storms measured next door.

Quick facts for Coconut Creek window projects

Use this as a checklist before you call. Anything tied to your exact address should be confirmed with the Building Division.

Quick facts for Coconut Creek window projects
Item What the sources show
Permit office City of Coconut Creek Building Division, Coconut Creek Government Center, 4800 West Copans Road, Coconut Creek, FL 33063
Contact 954-973-6750, ebuilding@coconutcreek.gov
Office hours Monday to Thursday, 7:00 AM to 6:00 PM; closed Fridays
Online system ePermits for contractor applications, permit status and inspection scheduling; uploads must be unlocked PDFs
High Velocity Hurricane Zone Yes, citywide. The 2023 code defines the HVHZ as Broward and Dade counties
Design wind speed 170 mph (3-second gust), Risk Category II, FBC 2023 Section 1620.2
Exposure category Exposure C unless Exposure D applies, FBC 2023 Section 1620.3
Retrofit pressure rule Broward BORA Formal Interpretation #24 for homes and townhouses under 30 feet
Condo inspections Broward Building Safety Inspection Program, 25 years from certificate of occupancy, then every 10 years
Flood map questions Utilities & Engineering, 954-973-6786; FIRMs dated August 18, 2014

Condo boards, the 25-year inspection and the 30-foot line

If you own a condo, talk to the board or the management company before you get a quote. An association may set one approved window or door product for the whole building so the exterior stays uniform. Your declaration and rules will say whether owners can replace their own units and what approval is needed.

Height changes the paperwork. Broward's Formal Interpretation #24 lets one- and two-family homes and townhouses under 30 feet use simpler pressure documentation. Once a building is over 30 feet, the rule is different: a Florida engineer or architect must sign and seal a site-specific design that lists each opening and its required design pressure. Generic charts are not accepted above that height.

Older condo buildings are also on an inspection clock. Broward's Building Safety Inspection Program, Policy #05-05, effective August 9, 2024, calls for an inspection at 25 years from the certificate of occupancy and every 10 years after. It counts as compliance with the state milestone law for buildings three or more stories tall. Owners generally get 180 days from the report to complete required repairs. With about 77 percent of local housing built before 2000, many buildings here are already past that first threshold.

Detached homes and fee simple townhouses are exempt from that program, along with one- to four-family buildings of three or fewer habitable stories.

Wynmoor, Winston Park and association rules

Two named communities show how much the association matters. Wynmoor, also called Wynmoor Village, is a gated 55+ condominium community. Its Community Council handles common-area and exterior maintenance, which is why owners there should expect window decisions to start with the association, not with a contractor.

Winston Park mixes single-family homes and condos under homeowner associations. The Township has its own master association. In both, frame color, glass tint and grid patterns are common subjects of written architectural rules.

We do not have a verified count of how many Coconut Creek homes are in associations, and we did not confirm whether the city's own design rules apply to a window style change on a house. Ask your association for its window specification in writing, and ask the Building Division if you plan to change the size or look of an opening.

The Building Division and ePermits

Coconut Creek runs its own Building Division. It sits inside the department now called Resilient Design and Development, which used to be named Sustainable Development. The office is in the Government Center on West Copans Road and keeps a four-day schedule, Monday to Thursday. Plan around Fridays, when it is closed.

The city says a permit is required for alterations and replacements of existing structures under the Florida Building Code, and Florida requires a permit to replace windows and exterior doors. Contractors apply through ePermits after emailing a Contractor Registration Form and creating a password. The system also shows permit status and is used to schedule inspections.

One practical detail trips people up. Uploaded files must be regular unlocked PDFs, and the city says PDF portfolios do not work in its system. A product approval file that arrives as a locked portfolio has to be converted before it can be filed.

The forms list includes the Broward County Uniform Permit Application, a city application addendum and a Window Door Shutter Submittal Package. When we checked on November 6, 2026, the link to that package returned an error, so call 954-973-6750 for the current version. Owner-builder permits are applied for in person. Fees are set in the city code, Section 13-38. When the contract is above the threshold in Florida Statute 713.135, a recorded Notice of Commencement must be filed before the first inspection.

170 mph, Exposure C and the missile test

Broward uses one design wind speed for the whole county instead of a map. Under FBC 2023 Section 1620.2, a Risk Category II building, which covers most homes, is designed for a 170 mph 3-second gust. Section 1620.3 treats every HVHZ site as Exposure C unless the harsher Exposure D applies. Being about 37 miles north of Miami and inland does not lower it.

In the HVHZ, impact products face the large missile test under TAS 201 and TAS 203: a large timber missile hits each of three test specimens at 50 feet per second. The Broward retrofit schedule then compares each product's rated pressure against what each opening needs.

Florida law lists the Miami-Dade Product Control Division among the approved evaluation entities, and statewide approval stops local governments from requiring extra testing when a product is used within its approval. Because the city's window package was not readable when we checked, confirm which approval documents the Building Division wants before you order.

Florida-registered engineers and architects may also modify the buck or fasteners shown in a Notice of Acceptance, with a signed and sealed letter or drawing. That helps when an older opening does not match the standard anchoring detail.

Homes from the 1980s and 1990s, and what they need

The median home in Coconut Creek was built in 1989. The 1980s were the busiest decade, at about 32 percent of units, followed by the 1990s at about 24 percent and the 1970s at about 16 percent. About 53 percent of homes predate 1990, and about 77 percent predate 2000, before the statewide Florida Building Code of 2002.

Original windows in homes that old went in under earlier codes, long before the 2023 test rules. These are the openings that come up most:

  • Single-hung and horizontal roller windows in condo units and townhouses, usually stacked in repeating sizes across a building
  • Sliding glass doors to balconies, patios and screened porches, which carry their own pressure and approval questions
  • Fixed picture windows in living rooms facing lakes or golf courses, where the required pressure deserves a close check
  • Corner openings, which fall in the higher-pressure end zone on the Broward schedule
  • Laminated glass at balcony guards, which the 2023 code accepts as an alternate to pickets when tested by an accredited lab

Wilma, Irma and the flood maps

The federal storm reports cite weather stations in the cities next door, and they tell the story. During Hurricane Wilma on October 24, 2005, the Pompano Beach Airport station in the neighboring city stopped reporting at a 72-knot sustained wind. The National Hurricane Center concluded that parts of Broward likely had Category 2 conditions, with gusts to near 100 knots, and that upper floors of high-rise buildings felt even stronger wind. Its damage list for South Florida included broken windows, roof damage and destroyed mobile homes.

That last item matters locally. The Census estimate shows about 1,200 mobile homes in Coconut Creek, about 4 percent of all units.

Hurricane Irma in September 2017 brought a measured 97-knot gust at neighboring Deerfield Beach, while most inland Broward stations stayed just below hurricane-force sustained winds. In Broward, a man died after opening his front door during the storm and being knocked down by a gust. Openings are the weak point in a house, and impact glass and doors are built to stay closed and intact.

Coconut Creek is rated Class 7 in FEMA's Community Rating System. Its current flood maps date to August 18, 2014, and the city notes many areas have changed designation since. For a property-specific answer, call Utilities & Engineering at 954-973-6786.

What a Coconut Creek window project looks like

In brief: association approval if you are in a condo or HOA, a measurement visit, product choices matched to each opening's required pressure, a filing through ePermits, the installation, and then inspections and permit close. The installation price table on this page lists labor by opening size. Product price is quoted separately by brand, series and size, and current factory pricing by size is on the Windows Stock Market instant price tool.

Materials typically arrive 2–3 weeks after contract for in-stock projects. No date is promised, since city review time and association schedules vary. Afterward, a wind mitigation inspection (form OIR-B1-1802) can document your opening protection for your insurer.

Working with Vieser Construction in Coconut Creek

Vieser Construction is an authorized installer for ESW, Mr. Glass and PGT. We coordinate your complete installation from measurement to final inspection.

Permit assistance is available. Our team coordinates the complete permitting process, including required documentation, engineering and permit submission, when applicable.

Before you call or text, gather a few details: whether you live in a house, townhouse or condo building, how many stories the building has, your association's window rules if any, and a count of openings by type. Those answers decide which pressure documentation and approvals your project will need.

Coconut Creek neighborhoods we serve

WynmoorWinston ParkThe Township

Installation price per opening in Coconut Creek

Installation is priced per opening, by the opening’s largest side. Doors are priced per panel. These are installation-only rates, plus 7% sales tax. The windows and doors themselves are quoted separately, line by line, by brand, series and size. Permit fees are set by the city and listed separately.

Installation only, ground floor and second floor
Opening Installation Unit
Window, largest side up to 74″ $200 per window
Window, largest side over 74″ up to 96″ $230 per window
Window, largest side over 96″ $250 per window
Any door (sliding glass, French, entry, swing) $300 per panel
Mullion (joint between two units) $50 each

Openings above the second floor are quoted after a site visit.

Impact windows in Coconut Creek: questions we hear

Who issues window permits in Coconut Creek?

The City of Coconut Creek Building Division, at the Government Center, 4800 West Copans Road. Contractors file through the city's ePermits system, which also shows permit status and schedules inspections. The office is open Monday to Thursday, 7:00 AM to 6:00 PM, and is closed Fridays. The phone is 954-973-6750.

How much does impact window installation cost in Coconut Creek?

Check the installation price table on this page. Installation is priced per opening based on the opening's largest side, and doors are priced per panel. The windows and doors themselves are quoted separately by brand, series and size. Permit fees are set by the City of Coconut Creek and are separate from the installation price.

What wind speed do impact windows need to meet in Coconut Creek?

For a typical home, Risk Category II, the design wind speed is 170 mph (3-second gust) under FBC 2023 Section 1620.2. Broward uses that single value countywide because the whole county is in the High Velocity Hurricane Zone. Each opening's required pressure then depends on its size, wall zone and building height.

I live in a Coconut Creek condo. Can I replace my own windows?

It depends on your association documents. A board may set one approved product for the building and require approval before owners replace units. If the building is over 30 feet, Broward requires a signed and sealed site-specific design listing each opening's required pressure. Ask the board or management company for the written window rules first.

Why did my ePermits upload get rejected?

The city states that uploads must be regular unlocked PDFs and that PDF portfolios are not compatible with its system. Product approval files are sometimes distributed as locked or combined portfolios. Convert them to a standard PDF before uploading, or call the Building Division at 954-973-6750.

Can Vieser help with the Coconut Creek permit paperwork?

Yes. Permit coordination is available for qualifying projects. Our team manages the required documentation, engineering coordination and submission process from start to finish. Tell us whether you live in a house, townhouse or condo building, since that decides which pressure documentation applies.

Related

Planning impact windows in Coconut Creek? We coordinate your complete installation from measurement to final inspection.

Call (754) 707-3281 or request an estimate.

Sources: City of Coconut Creek Building Department · City of Coconut Creek Resilient Design and Development · City of Coconut Creek ePermits · City of Coconut Creek Code of Ordinances, Sec. 13-38 Building permits · City of Coconut Creek Floodplain Management · City of Coconut Creek: About Coconut Creek · Florida Building Code 2023, Chapter 16 (UpCodes) · 2023 Florida Building Code excerpts (National Glass Association handout) · Broward BORA Formal Interpretation #24 (8th Edition) · Broward BORA Policy #05-05, Building Safety Inspection Program · Florida Statutes s. 553.842 · Florida Statutes s. 713.135 · U.S. Census Bureau ACS 2024 5-year (via Census Reporter) · NOAA/NHC Tropical Cyclone Report: Hurricane Wilma · NOAA/NHC Tropical Cyclone Report: Hurricane Irma · Wikipedia: Coconut Creek, Florida · 55places: Wynmoor Village




Other Broward County cities we serve

Impact windows across Broward County

📞 Call Now
Free EstimateCall or Text
See your home with impact windows